Build it yourself · 19 steps

Build the PC

Pick a part from the tray, then click the glowing outline where it goes, or drag it there. The order matters: a part that goes in too early is refused, and the game says why.

Guided build · step 1 of 19

Fit the power supply

Pick the first part from the tray. The glowing outline shows where it goes.

Time
0:00par 5:00
Mistakes
0
Steps
0 / 19

Guided build

Step by step. The slot you need next glows, and every step says why.

Par 5:00Earns starsFixed parts

Only the slot for the part you pick lights up. A rejected part says why. Mistakes cost time.

The build order

Each part goes in after the ones it rests on. The steps run in this order; the current one is in the step bar.

  1. 1.Fit the power supply
  2. 2.Lay the motherboard on the bench
  3. 3.Seat the CPU
  4. 4.Install memory stick in slot 2
  5. 5.Install memory stick in slot 4
  6. 6.Install memory stick in slot 1 (four-stick kits)
  7. 7.Install memory stick in slot 3 (four-stick kits)
  8. 8.Fit the NVMe drive
  9. 9.Mount the board in the case
  10. 10.Fit the CPU cooler
  11. 11.Mount the front intake fan
  12. 12.Mount the rear exhaust fan
  13. 13.Install the graphics card
  14. 14.Mount the SATA drive
  15. 15.Connect the cables
  16. 16.Close the left glass panel
  17. 17.Close the right steel panel
  18. 18.Snap on the front panel
  19. 19.Power on